Sign In | Join Free | My enlightcorp.com
China Shanghai Lorechem Company Limited logo
Shanghai Lorechem Company Limited
Verified Supplier

1 Years
Home > CPU Adhesive >

CPU / TPU Universal Adhesive Bonding Agent Solvent Based Clear One Component

Product Categories
Shanghai Lorechem Company Limited
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now

CPU / TPU Universal Adhesive Bonding Agent Solvent Based Clear One Component

  • 1
  • 2

Brand Name : Thinkbond

Model Number : xxxxx

Place of Origin : China

MOQ : None

Price : 1-99 usd

Payment Terms : T/T

Supply Ability : 20T/week

Delivery Time : 5-15 working days

Packaging Details : 25L, 200L

Classification : Chemical

Name : Bonding Agent/ Adhesive

Odor : solvent

Application : bonging for rubber and steel

Diluent : Solvent

Contact Now

Universal bonding agent for CPU/TPU Solvent-Based Adhesive

Application Field:

It is a Clear One-Component Solvent-Based Bonding Agent for Castable Polyurethane Elastomers and Thermoplastic Polyurethane Elastomers (PU’s And TPU’s).
It is a heavy metals free product.

Properties:

State : liquid

Shelf life: 24 months


Advantages:

  • Universal bonding agent for CPU
  • Easy to apply
  • High bonding activity
  • Less harm to health

  • Excellent long-term pre-curing properties

  • Good resistance of cold and hot water

  • Cost-effective

Application:

  1. Prepare the metal surface properly by removing completely oil, grease and dirt.
  2. Blasting the surface with grit blasting steel so that the surface roughness is greater than 15 µm.
  3. For aluminum surfaces we recommend the use of aluminum oxide as abrasive.
  4. Clean again the substrate to remove dust from blasting residues.
  5. If specified, the metal part can be phosphatized, galvanized, chromate conversion treated or KTL,
    before applying adhesive.

Applying Thinkbond:

Agitation: We recommend stir Thinkbond 942 before the application to avoid settle down.
Brushing: Application by brushing is normally undertaken without further dilution, but for coating large areas, dilution with MEK (or the diluent blend shown below) improves flow and speed of application.
Spraying: We recommend an HVLP gun using 1.5 Bar air-pressure and a nozzle size of 1 -1.5mm. For this application we recommend diluting between 50 and 100% v/v.
Roller coating: Dilute to 35 - 45 seconds on a DIN 4 or Ford 4 cup at 25 C for most roller application processes. Dilution with a high boiling solvent like MPA may be necessary to achieve the best finish and to reduce the skinning of the bonding agent in the applicator.
Drying: Dry the film between 10 and 30 minutes at room temperature. If it is necessary to reduce drying time, we recommend to use forced air for 5 minutes at 100ºC maximum. Do not use in this stage temperatures above 100ºC to avoid adhesive pre-cure. After this process, follow to cure.
Thickness of application layer:
The film obtained by applying Thinkbond 942 is colorless.
The layer thickness must be between 15 and 25 µm.
For severe environments or dynamic fatigue applications, use ≧25 microns. Under these conditions it is possible to achieve bonds with no edge-failure after 400 hour salt-spray tests
Parts with Thinkbond 942 already applied can be stored for 30 days prior to cure.

Storage:
Keep container tightly closed during storage and always keep away from heat sources. Store in an environment below 10ºC increases the shelf life of the adhesive.
More Thinkbond adhesive:
Application Suitable code Dispersing medium Advantages
Bonding agent for CPU Thinkbond 942 Solvent based Universal bonding agent for CPU; Easy to apply; High bonding activity, Less harm to health.
Bonding agent for CPU Thinkbond 946 Solvent based Excellent long-term pre-curing properties; Good resistance of cold and hot water; Cost-effective.
Bonding agent for fluorine rubber & silicone rubber Thinkbond 94S Solvent based Environmentally friendly; Diluted with absolute ethanol; Universal applying and can be used for various skeletons.
Bonding agent for fluorine rubber & silicone rubber Thinkbond 93H Solvent based Environmentally friendly; Diluted with absolute ethanol; Universal applying for various vulcanization systems fluorine rubber.
CPU / TPU Universal Adhesive Bonding Agent Solvent Based Clear One Component

CPU / TPU Universal Adhesive Bonding Agent Solvent Based Clear One Component

CPU / TPU Universal Adhesive Bonding Agent Solvent Based Clear One Component

Shanghai LoreChem Co., Ltd. was established in 2008. It is a high-tech enterprise which is dedicated to serve releasing products which involve semi-permanent release agent, anti-sticking, surface lubrication and thermal reactive adhesive. Shanghai LoreChem has been improving product quality for 15 years. The releasing products are mainly applied in rubber, polyurethane and composite industry. The brand of Lubekote for release agent and Thinkbond for adhesive have been registered in China. Both of them are well known in the industry.
Shanghai LoreChem 's business is all over the domestic and foreign high-end production enterprises by providing professional technical solutions and services. The company's long-term goal is to become one of the best suppliers of release agent in Asia.


Product Tags:

Adhesive Bonding Agent for TPU

      

TPU Adhesive Bonding Agent

      

CPU Bonding Agent Solvent Based

      
Quality CPU / TPU Universal Adhesive Bonding Agent Solvent Based Clear One Component for sale

CPU / TPU Universal Adhesive Bonding Agent Solvent Based Clear One Component Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Shanghai Lorechem Company Limited
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You May Like